TORQUE TOOL TORQUESETRegular price OMR 40 Save OMR -40
The BBB TorqueSet Adjustable Torque Tool is easy to use and it might just save you a whole lot of cash in the long run.
If you don't own a torque wrench, get one. Bike manufacturers often tell us about people who have written off components or even frames by overtightening bolts. Gulp! It won't happen to you? I hope you're right, but even very experienced mechanics shouldn't rely on feel when going just a touch too heavy can result in a parts failure.
This BBB torque wrench is adjustable from 2-14Nm – a range that takes care of most bike components... stems, handlebars, seatposts, pedal cleats and so on.
First, you select the correct ratchet position on the tool head, then you set the maximum torque by pressing and turning the adjustment knob on the end of the handle. There are six increments per 1Nm and a clear gauge tells you exact where you're at.
Then you do your tightening. When you reach the maximum torque that you've set, you'll feel the handle click and you're done. Easy! The handle is easy to grip and it's 18cm (7in) long so you get as much leverage as you'll need.
The tool has been calibrated at the factory. You get a little Certificate of Calibration that gives you its accuracy, and it can be recalibrated further down the line.
You get some of the most common hex tools you're likely to need included in the package: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm. You also get a T25 torx tool. If you need anything else, it's a standard 1/4in drive so you can use normal sockets. The whole lot comes in its own padded protection case to keep it safe.