Description of Finish Line Teflon-Plus Dry Lube Lubricant 60ml

Stan's NoTubes Tire Sealant - Pint - 473ml

• The original duPont Teflon based lubricant made specifically for use on bicycles. Teflon is used to reduce the coefficient of friction and reduce mechanical wear, and is suspended in a solvent carrier.
• Penetrates into hard-to-reach areas for maximum protection, such as the internal pins and bushings of a chain.
• Dry' formula resists attracting dirt and grime.
• For use on chains, derailleurs, and shifter and brake pivots .
• The synthetic oils used are non-toxic and biodegradable.

Finish Line Citrus Bike Chain Degreaser

The citrus bike degreaser is super strong and fast bike components cleaning solution. Finish Line Citrus Bike Chain Degreaser was the industry's original orange peel based cleaner that has set the standard since 1988. Citrus Bike Chain Degreaser is formulated with powerful and natural citrus extracts, so a bicycle drivetrain will clean up faster and with less scrubbing. This technology will break down and remove the grease, oil, and wax that build up on a bike's drivetrain. Rinse with water for a residue-free finish.

Application tips: Simply spray or brush along bike chain, chainring, rear derailleur, front derailleur, cassette, and jockey wheels. Lightly scrub along these bike parts to remove black dirt, old sticky grease that builds up in the bike components with a brush and rinse off with water for a residue-free finish.

NOTE: Do not apply Finish Line Citrus Degreaser on any braking components.

• Aerosol Spray Can: 355ml (12oz) | Pour Can: 600ml (20oz)
• Formulated with powerful orange peel based natural citrus extracts
• Break down and remove grease, oil, and wax with a simple scrub
• Thoroughly clean components with every application.

• The original duPont Teflon based lubricant made specifically for use on bicycles. Teflon is used to reduce the coefficient of friction and reduce mechanical wear, and is suspended in a solvent carrier.
• Penetrates into hard-to-reach areas for maximum protection, such as the internal pins and bushings of a chain.
• Dry' formula resists attracting dirt and grime.
• For use on chains, derailleurs, and shifter and brake pivots .
• The synthetic oils used are non-toxic and biodegradable.

Description of Finish Line Ceramic Wax Lubricant 

Speed Bike Degreaser™ is formulated with specialized solvents which break down grease and grime and other solvents whose specialty is removing organic soils like dust and dirt.

Like its name suggests, Speed Bike Degreaser™ is one of the fastest ways to clean a drivetrain. For most applications, specialty brushes and tools are not required. Since Speed Bike Degreaser™ leaves no residue and dries rapidly, lubricant can be immediately applied and the bike can go on its way.

Available in a recyclable steel 17oz. ozone-safe aerosol can.

Wet Lube is typically recommended for extreme conditions. Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives. Wet Lube is Finish Line's strongest, longest lasting and most water resistant lubricant. Wet Lube goes on wet, and stays wet, to provide maximum drivetrain smoothness, extremely quiet rides, and ultimate rust protection in the harshest of environments.

If you use Wet Lube for riding off-road or in dry climates, be sure to wipe the excess from parts to minimize the attraction of dirt and grime. Since 1994, when Wet Lube was first introduced, it has become the preferred lubricant for many professional on and off-road teams around the world.

Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, wet-style lubricant that requires a little more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection.

DESCRIPTION
The 6051 Liqui Moly – Bike Chain Oil Dry Lube for Dry Conditions provides outstanding long-lasting lubrication for the bicycle chains. Specially designed for dry and dusty conditions. Contains a selected combination of active ingredients that offer extreme wear protection as well as high penetration and adhesive properties. Tangibly reduces the friction of the chain and ensures particularly quiet operation.

Content measure
100ml plastic application bottle.

Application
Clean the chain with Bike Chain Cleaner (part no. 6054). Then apply Bike Chain Oil Dry Lube thinly to the dry chain. Wipe off any excess. Any deposits remaining after shaking will not impair product quality and can be disregarded.

Comment
Avoid contact with brakes!

DESCRIPTION 

Premum wax-based lubricant. Optimal cleanliness.

Extra Dry Wax is a wax-based dry lubricant that keeps drivetrains extra clean by effectively repelling water and dust. Made from a water and wax bse, it offers high protection against the corrosion and provides excellent lubrication that makes gear changes smoother. This highly effective lubricant is especially suited for avid cyclists concerned with maintaining a smooth, quieter, clean and dry drivetrain. 

• Suitable for all weather conditions
• Chain clean lubrication with this wax
• Protective coating - excellent protection against wear, rust and oxidation
• Friction reduction - smoother pedalling and a quieter drivetrain
• 120ml squeezable bottle with safety cap
• 5* performance
• 3* durability
• 5* cleanliness

Application Instructions

1. Degrease and clean the chain using, for example, Zefal Bike Degreaser and the ZB Clean brush. Effective lubrication can only be achieved on a clean, degreased chain.
2. Rinse and dry using a cloth
3. Apply a moderate amount of Pro Wet Lube on the chain while rotating the pedals
4. Wipe any excess lubricant off the chain 

BIKE DEGREASER

DESCRIPTION

UFO Drip - New Formula 

This new and improved formula of the CeramicSpeed UFO Drip Chain Coating is even faster and longer lasting than the first formula.

The chain coating is developed to support all disciplines and is based on a non-toxic, non-flammable and bio-degradable formula. For wet conditions, the chain must be dried following the ride and a fresh coating of UFO Drip applied to ensure the best protection and continuing optimization

• 180ml / 6oz bottle contents
• Up to 300 km. per coating
• Up to 35 coatings per bottle
• Over 15% faster than previous formula
• Increased temperature stability - apply between 5-35^oC / 41-95^oF

Product Detail

Buy the Shop Quality Chain Cleaner - Kit locally

DESCRIPTION:

Graduated two ounce injector makes application of sealant simple, with no mess or waste of sealant. Dual-threaded tip fits both presta (inner threads) and schrader (outer threads) valves.

About this product

Max™ Suspension Spray

---

• 
• 
• 
• 
• 
• 

---

Over time fork stanchions can become dry and less responsive. This can result in loss of travel, slow rebound, and cause the fork to feel very stiff over bumps. When this happens, a quick shot of Max™ Suspension Spray will immediately improve your fork's performance.

Max™ Suspension Spray is formulated with Non-Stick Ceramic Technology to fight stiction, condition and protect seals, o-rings, and other rubber parts. Max improves the surface slip of any stanchion, even ones that are coated!

Use Max on old forks to bring them back to life or use Max to help break in new forks and optimize their performance. As Max reduces stiction, forks run more smoothly and quietly. Small bumps are instantly absorbed and response to big hits is noticeably improved.

Max™ Suspension Spray will keep your bike in race-ready condition.

Finish Line's 1-Step™ is engineered for cyclists seeking a quick, one-step clean and lube formulation. As 1-Step flushes out contaminants and old lube, it leaves behind a clean new film of low friction lubricant. For cyclists on the go, 1-Step is the perfect choice for maintaining your bicycle's drivetrain.

1-Step is recommended for cyclists who take a minimalist approach to drivetrain maintenance. It is formulated with rust and corrosion inhibitors that provide ultimate protection in extreme conditions including coastal salt air. 1-Step does not compromise on its ability to reduce pedaling friction over long intervals, often exceeding 100 miles. Professional mechanics also use 1-Step to free gummed-up shifters and stiff cables.

Specifications:

• Brand new
• 502ml/395g
• Cleans and lubricates

For the repair of normal and tubeless bicycle tires from 12 to 29 inches. Can be used for all common bicycle valves (Schrader, Presta valve and Dunlop valves). Also suitable for e-bikes.

Special combination of active agents for first aid in the event of punctured tires. Repairs flat tires without the need for removal. Not suitable for use on tubes that ripped or cut at the side, or if the tire has slipped off the rim.

PRODUCT VARIANTS

Bikeworkx CHAINN STAR EXTREM 50 ML

• suitable for extreme conditions

PRODUCT DETAIL

EFFETTO MARIPOSA Végétalex sealing milk | 1000 ml

Effetto Mariposa Végétalex sealant dispenses with environmentally harmful substances and plastics without affecting functionality, i.e. sealing and durability. As the first sealant of its kind, it is based entirely on biodegradable cellulose fibers and ground olive stones bound in a polysaccharide carrier solution. No harmful chemicals are released in the event of a flat tire. The sealant seals holes and tears up to 5 mm in size. The emulsion is easy to clean and does not clump together over a long period of time, which makes it very economical to use. This makes Effetto Mariposa Végétalex Sealant the ecological benchmark in the field of tubeless technologies.

made in Italy


Note:
Végétalex will last 2 years after the bottle was opened for the first time, provided the bottle is properly closed, protected from direct sunlight and the storage temperature is between -20 ° C and + 50 ° C.
If additional protection is required, e.g. E.g. a journey lasting several days in rocky, thorny terrain, Effetto Mariposa recommends adding 30 ml of product to the recommended amount.


Technical specifications:

Sealing: seals punctures and cracks up to 5 mm
Compatibility: with most common tire and rim combinations
Compatibility tire / rim: free of ammonia
Dwell time in the tire: 3 - 6 months
Minimum filling quantity per tire: 70 - 84 ml MTB (29 x 2.10 inches)
Temperature range: -20 ° C to + 50 ° C
Features: compatible with the use of CO2 cartridges, biodegradable and completely plastic-free
Content: 1000 ml

DESCRIPTION:

We developed the Dual Action Repair for Tubeless (DART) to repair large punctures and slices in tubeless tires faster, easier, and more reliably than existing tire plugs. Unlike traditional tire plugs that attempt to press rubber strips into a puncture, dual action DARTs create both a mechanical and a chemical seal. The DART anchors into a puncture while creating a simple and safe chemical reaction with your Stan’s sealant to quickly form a permanent airtight bond. The DART’s patent pending ability to react with latex sealant makes tubeless tire repair fast, easy, and reliable for every rider.

Traditional plug tools were originally developed for car tires, and their long, sharp tips can cause damage to rim tape, or cut hands. Even worse, their plugs can actually expand many punctures because they rely on only a tight fit to hold them in place. In contrast, the DART’s sonically welded plastic tip and heavy duty woven material anchor firmly in place and stay put during even the most aggressive riding, while being safer for rims, rim tape, and your hands. The strong and flexible laser-cut material of the DART contours to different punctures and maximizes surface area sealing power. Because the DART anchors to your tire and creates a bond with your sealant, it also won’t pull out while riding the way a conventional plug can. One of the best features of the DART’s design is that it doesn’t require trimming once inserted, and excess material won’t get in the way of your ride. DARTs can’t be felt while riding, even on road tires, and they wear smooth naturally.

At only 15g complete, the DART Tool is designed to be extremely light, durable and compact to fit into pockets and packs, while offering an ergonomic design that’s easy to hold and allows precise DART placement. The DART Tool’s handle includes a built-in valve core remover, making it easy to add sealant. The tool is made of an ultra-strong but light molded plastic. Because even the small details are important, the rod that presses DARTs into punctures is made of ultralight, corrosion-resistant and incredibly strong carbon. The DART Tool is covered by a limited lifetime warranty.

Ease of use and rapid deployment were main priorities in the development of the DART Tool. Its carbon insertion rod is calibrated to let you insert DARTs to the perfect depth every time, just by pressing until the head of the tool contacts your tire. No more guessing games, or damage to rim or rim tape during a fast repair. The head of the DART Tool is double-sided and reversible, allowing it to hold two sealed DARTs on each side. This makes it possible to install two DARTs quickly when sealing the largest slices and punctures and even multiple punctures. Clear thread-on caps protect the stored DARTS, keeping them clean and ready to use, while being quick to unthread for fast deployment. The DART Tool packs all this repair capability into a compact shape that easily fits in any pocket or pack.

The DART makes tubeless tire repair fast, easy, and reliable for every rider.

DART Tool instructions available here. 

FINISH LINE SUPER BIKE WASH, 1 LITER SPRAY BOTTLE

Super Bike Wash™ is strong enough to remove surface grime off the drivetrain and safe enough to remove all the grime that builds up on the frame, saddle, brakes, and handlebar tape. Safe for carbon fiber, titanium, aluminum, steel, and clear coat.

Recommendation: Use Super Bike Wash™ every second or third ride to keep your bicycle looking like new and to remove the contaminants that slowly but surely starts to degrade look and performance of a bicycle.